Zhejiang Zhenxing Furniture Technology Co., Ltd. is one of the most professional manufacturers and suppliers of rotating chair mechanism in China, also supports customized service with low price. If you're going to wholesale high quality rotating chair mechanism, welcome to get free sample from our factory.
Products Description
Rotating Chair Mechanism Applicable Range and Installation Hole Position Description
Rotating chair mechanism is a commonly used hardware accessory for chairs. It is mainly used for adjusting the height and angle of chair seats to meet different user needs. The mechanism has a compact structure, stable performance, and easy installation. In this article, we will introduce the applicable range and installation hole position of the rotating chair mechanism.
| Item | Carton size | Package | hole to hole | N.W. | Loading QTY |
| ZXT-MC010-0011 | 43*36*28cm | 10pcs/ctn | 256*150mm | 1.67kgs | 6400PCS |
Applicable RangeThe rotating chair mechanism is suitable for various types of chairs, such as office chairs, computer chairs, gaming chairs, and bar stools. The mechanism has good load-bearing capacity and can support the weight of people sitting on chairs. The height adjustment range is generally between 10-15cm, which can meet the requirements of different people's leg length. The angle adjustment range is generally between 0-25 degrees, which can meet the
When the user presses the lever or button located under the seat, the control valve opens, and the compressed gas is released into the pneumatic cylinder. The cylinder is attached to the base assembly and the seat, and as the gas moves into it, it forces the seat to move upward. Depending on the amount of gas released, the seat will rise to a maximum height set by the manufacturer.
Furthermore, the control valve is designed with a release mechanism that allows the user to lower the seat. When the lever or button is released, the valve closes the gas supply to the cylinder, causing the seat to gradually lower. This mechanism ensures that the user can adjust the seat height smoothly and easily by making small movements with the control lever.
requirements of different people's sitting posture.
Installation Hole Position
When installing the rotating chair mechanism, it is necessary to pay attention to the hole positions of the mechanism and the chair base. The following are specific hole positions:
Mechanism Hole Position
The mechanism has four screw holes at the bottom, which are used to connect the mechanism to the chair base. The hole diameter is generally 7.1mm, and the hole distance is 236mm×171mm. The screw size used for installation is generally M6.
2.2 Chair Base Hole Position
The chair base also has four screw holes at the top, which are used to connect the mechanism to the chair base. The hole diameter is generally 10.2mm, and the hole distance is 152mm×152mm. The screw size used for installation is also generally M6.
In conclusion, the office chair up-and-down mechanism is an essential component of modern office chairs that allows the user to adjust the height of the seat. The basic mechanism involves a pneumatic cylinder that is triggered by a control valve, allowing the chair to move up or down based on the amount of gas released. Its innovative design and additional features make it an essential element of ergonomic office furniture today.
Installation Steps
The installation steps of the rotating chair mechanism are as follows:
Remove the old mechanism (if there is one) and clear the installation position.
Put the mechanism in the installation position of the chair base, and align the screw holes of the mechanism with the screw holes of the chair base.
Put the screws through the screw holes on the chair base and the mechanism, and tighten them.
After installation, test the rotation and angle adjustment function of the mechanism to ensure that it works properly.
In conclusion, the rotating chair mechanism has a wide range of applications and is easy to install. When installing, it is important to pay attention to the hole positions of the mechanism and the chair base to ensure a secure installation. By following the above installation steps, the mechanism can be easily installed and enable chairs to have height and angle adjustment functions
FAQ
Q1: Are you manufacturer or trading company?
A1: We are manufacturer who own many chair parts' mould.We have professional experience in manufacturing gaming chairs,sell to more than 23 countries.
Q2:When can i get the quotation?
A2:We offer quote you within 24 hours after get your inquiry.
Q3: How can i get sample?
A3: We offer free sample within 7days as normal,Only need you pay Express charge the first time.
Q4:What about the lead time for order?
A4:The lead time for 1x20'container about 10days.
Q5:What is your terms of delivery?
A5:We accept EXW, FOB, CIF ect.
Q6:What is your terms of payment?
A6:We accept T/T payment and L/C at sight.
Q7:Do you provide warranty?
A7:Yes, we focus on the quality very much, we always provide 3 years warranty.
Hot Tags: rotating chair mechanism, China rotating chair mechanism manufacturers, suppliers, factory, ift Chair Mechanism, Mechanism For Recliner Chair, Chair Height Adjustment Mechanism, Swivel Mechanism For Chair, Office Chair With Forward Tilt Mechanism, Antique Office Chair Mechanism
